Xbox 360 Controller Setup?Follow

I can't help you specifically since I've never used a wired xbox 360 controller. I'm more fond of PS2/PS3 like controllers.

That said, search for Final Fantasy XI config (yes it should be spelled like that) and click Gamepad Settings. It's prolly the default config it's on; check around, and you might have to do this custom to get it to go on the stick. To do that, hit Camera and go from there.

If I'm wrong, someone who uses that needs to step up to help.

1st thing is to make sure you have your controller configured in windows using the game controller configuration tool. 2nd thing to do is to launch ffxi config and select gamepad then just manually choose what u want each control to do.

In ffxi config setup utility there is a "camera" option select it it will ask u which button u want the camera on, push up on your right analogue stick and press button "A" on the controller to assign it.

In the ffxi config utility open gamepad menu, in the top right corner make sure that "enable gamepad" and "enable hat switches" are both ticked/enabled. Then try by button 1 I mean the green button on your xbox360 controller marked as "A". Then selece camera a small box opens it will tell u to push up on the and press button 1, Push your right analogue stick up/forward, then press the green button on your controller, watch the screen in the box where it told u to push up it will now tell u to push down then right then left pressing the green button each time. the only thing which changes is the direction word in the same box each time so it's easy not to notice it after that is done that box will vanish and be replaced with a confirmation box, this should have a small crossair in it that u can move around with your right analogue stick check that it moves and then confirm it and that should be that. If it still doesnt work after that then either u have it assigned to a different function already and will have to unassign it first or your computer isn't recognising the input in which case u will need to configure it in windows first.

which operating system are you using?

turn the controller on - go to control panel> devices and printers> you should see a picture of your xbox controller click on it and then on properties and then on the configuration wizard.

Awesome! I got it to work finally.

Final question, is there a way to get the macro ( ctrl-alt ) assigned to LT-RT?

Oh the LB-RB? I could do that. By any chance do you know the button numbers on the layout?

I'm going to have to give it a try once I get home, I cannot thank everyone enough for the help :) I forgot what a friendly game community was like.